Robin Ultralight

I had just laid up the Spinner and Spinner backing plate. I had to wait 72 hours for my resin system to cure sufficiently to be able to trim...

I prepped the lower cowl for layup by applying 7 coats of Carnauba mold release wax. Followed by a buildup of Rexall Partall 10 PVA release ...

I finished laying up the upper cowl. I have a neat trick that works very well that I will share. The process of contact wet lay up, that is ...

The mold is finally finished. I know I'm going through a lot of extra work, but who knows, I might want to sell some cowlings some day. ...

I cannot believe how many Russian subscribers I now have!!!  Welcome! On Saturday I swapped labor with my friend Michelle. She needed a new...

I have finished extending the cowl surfaces to the table. This was a ton of mostly useless work. The plaster master was built slightly beyon...

When I left off I had just released the Plaster male master from the female plastic splash. The male master had inlet inserts incorporated i...