Weight and Balance (unofficial roll out)

Well the weather finally broke, I sat inside working on my new wing redesign until I saw the first glimpse of the sun. I quickly gave my buddy Ed a shout and he came over to help me assemble the Robin out doors for the first time. This will be the longest Blog entry to date, there are a ton of pictures. Most were taken by Ed who showed me all the cool features I never knew the I-phone had!!

Farmer Ed

My Buddy Ed from down the street. He and I drove 3 weeks ago to Phoenix to buy the Mini Max project and my Ballistic Parachute, My chute is back to the manufacturer Second Chantz http://www.secondchantz.com/index.html  Getting repacked and re armed. I should have it back sometime next week. That is the only reason the fuselage is not covered. I need to route the riser straps outside of the longerons and around the main spar and landing gear. Give ole John Dunham a call and he will fix you up with a nice Ballistic Parachute!!

Front view

The wings have two coats of  Latex UV barrier paint. I was following the process outlined in the last blog entry. I have used a little over 3/4 of a gallon so far. I will easily be able to finish all of the fill and UV barrier coats on the is airplane for under 1 gallon. I am really impressed with this finishing method. It sure is cheaper than the certified water based systems. I had allotted 18 lbs of weight for the complete cover and finish. so far I am just under 5 lbs. This became really good news later in the day when I completed the weight and balance.

a man and his plane!!!

Here I am with my other friend

Me and Boo

Me and You and a dog named "Boo"

Left quarter view
 I'm pretty sure I will need a larger rudder.

Right Rear Quarter view

looking down the L/H wing. We are getting set up for the weight and balance

Looking down the R/H wing









 

               L/H cowl view

My Friend Yuki Yoshi Ishihara of Chiba Prefecture Japan bought me this Propeller. I plan on Painting the words "Yuki's Prop" on it eventually. This is a CGS ground adjustable prop. It weighs 8.5 lbs. I will switch to a fixed pitch Spruce blade once I dial in the correct pitch. That will reduce my empty weight by 7 lbs.

   




 looking up

Exhaust side

I thought this was a pretty cool Picture Ed took.

leveling the Robin while Boo supervises

The plane was leveled and 3 scales were placed under the three wheels. The upper longeron is the level point.
Ed and I discovered a huge scale error under load. We spend some time calibrating the scales until we were assured they were accurate. That's what I get for buying $7.00 scales from Target!!

important first step!!!

Now this was a really important first step, literally!!! I rebuilt the inbd root leading edge of the L/H wing to add a walk way. It was solid as a rock!!

size 11's

You can see in this picture how 245 lbs is distributed over a fairly large surface area. The actual analysis however assumed I would place all of my weight on only one stringer. Over kill, but conservative and the step literally is rock solid.

An old designer once told me never to design for a skinny kid!! They never have any money!!

It is very comfortable in that cockpit. The profile of the seat is right out of a Jantar Ad in Soaring magazine. They claim its the most ergonomic seat shape ever designed. I believe them!!!

notice that the gear still has negative camber at full gross weight!!

Real Dummy

See if this Dummy looks just like

Fake Dummy

this Dummy!!!



(notice the gut)

Real Dummy again

The Jantar seat profile is really clear in this view. The Yarmulke really does its job. I definitely need to add some vents. It got hot really quick in that green house

Ed playing with his "Stick"

I asked Ed to work the controls and play with the Stick, I think he misunderstood me!!!!!

final weight and balance

So here is the end result of all of this fiddling around. I calculated the Neutral Point (NP) at 37.5% This is the point  around which all the aerodynamic forces are balanced. The center of gravity must be forward of the NP with a margin of safety Typically 10% to 15%

Well after all the sweating and sleepless nights here is the final numbers.
CG with no fuel  is 29.1% with a static margin of 8.2%

CG with fuel is 25.8% with a static margin of 11.5%

this is a good link to an online calculator   http://www.geistware.com/rcmodeling/cg_super_calc.htm

This is as close to perfect as I ever thought I could get. Now for the best news, the plane weighs 262 lbs with the 7 lbs extra weight prop hub. and with parachute it will weigh 276 under the 284 FAA part 103 weight allowance allowed for a Ballistic chute. With the light prop the empty weight will be 255lbs. The new wings will be at least 30 lbs lighter, that and some other weight improvements will easily allow for brakes and a starter on plans built planes.